Drafting in Octave/Matlab

Plotting package of octave is very powerful. It can be used to plot architectural drawings. Following steps are required:

  1. Sketching the layout on paper while noting down the points and labeling it.
  2. Afterwards, the coordinates of point is calculated.
  3. Commands of line, gtext and axis limits are used.

For demo, m-file named drawoschool.m (draw octave school) is created which can be downloaded from here

To use this m-file, type:

Architectural Drafting in GNU OCTAVE
Architectural Drafting in GNU OCTAVE

Leave a Reply